UAD 3.6 SmartAdjust

Using SmartAdjust in UAD 3.6 Reports

SmartAdjust lets you set adjustment values for rows in a UAD 3.6 report’s Sales Comparison grid. Because UAD 3.6 requires multiple area categories and individual adjustments, the standalone Square Footage Adjuster from Legacy UAD and standard reports was not carried forward; use SmartAdjust to configure and calculate area adjustments for your comparables. Some rows accept adjustment values directly, while other rows let you configure values for individual descriptions or ratings. You can also save and load adjustment sets for reuse.

To access SmartAdjust, go to the Sales Comparison (Side-by-Side) report section of a UAD 3.6 report, and click the Smart Adjust Hidden button on the upper left to show the SmartAdjust column. The button changes to SmartAdjust Active when the column is displayed.


Enter adjustment values

The SmartAdjust column appears between the subject property and the comparables. For rows that accept direct entry, enter an adjustment value in the Adj. Value field. If the row has a Threshold field, you can also enter a threshold using the units shown in the column header.

When a SmartAdjust adjustment is applied to a row, a SmartAdjust icon ( ) appears beside that row’s description.


Configure a row

Some rows need additional settings before you can apply an adjustment. These rows show a Configure button.

  1. Click the Configure button in the row.

  2. In the Configure SmartAdjust window, choose the adjustment value unit on the upper right and enter a value for each item.

  3. Click Save to save the row’s settings, or Cancel to close the window without saving.


Save an adjustment set

You can save the current SmartAdjust settings as an adjustment set for reuse.

  1. In the SmartAdjust column, click the Save icon.

  2. Enter a name for the adjustment set.

  3. To share the set with other TOTAL users, select Share this template with all TOTAL users.

  4. Click Save.


Load an adjustment set

  1. In the SmartAdjust column, click the Load icon.

  2. Select the adjustment set you want to use.

  3. Click Load.

The list shows each set’s name, modification date, and whether it is shared. Use the trash icon beside a set to delete that saved set.


Clear the current adjustment set

To clear the adjustment set currently shown in the SmartAdjust column, click the red X icon. This is separate from deleting a saved set from the load list.