Order PowerView > Set Up Order Preferences > Change Start Points for Directions
     
 

Change Start Points for Directions

 
     

If you use WinTOTAL to retrieve directions to your property inspections, you may need to change the starting location for those directions from time to time. In WinTOTAL’s Order PowerView, you can specify an alternate starting point for your driving directions. To do so:

  1. In WinTOTAL’s Order PowerView, check the Order Map and With Directions boxes in the Options pane on the left side of the screen.
  2. Click the With Directions link in the Options pane.

    StartLocation

  3. In the screen that appears, indicate whether you want to start from your local office address or from an alternate starting point by checking or unchecking the Use Local Office Address box at the bottom.
  4. If you’re using a start point other than your local office, type in the address you wish to use as the starting point for your driving directions into the available boxes.
  5. Finally, click OK to apply your changes.

After a few moments, WinTOTAL automatically changes the driving directions in your order form to start from the new location.



  • a la mode and its products are trademarks
  • or registered trademarks of a la mode technologies, llc.
  • Copyright © , a la mode technologies, llc. 1‑800‑ALAMODE