If you’ve purchased a sketch license from one of the vendors in our WinTOTAL
marketplace, you can quickly and easily enable WinTOTAL’s integration with that
software via the sketch configuration options. To enable WinTOTAL’s
integration with a vendor from the WinTOTAL marketplace…
- From the Sketching settings in WinTOTAL Configuration Utility, choose the
sketch vendor from the Choose your sketcher drop-down menu.
- Then, click the Register link that appears.
- If WinTOTAL detects that you’ve already installed the software you
selected, you’re prompted about how you want to authorize your sketcher.
Mark your preferred option and click Next. Options are:
- Online – Authorizes your sketcher for full use in
WinTOTAL.
- Manual – Temporarily authorizes your sketcher when you
supply an authorization code from your sketch vendor. You must
register online within 14 days in order to fully authorize your license in
WinTOTAL.
- Demo Mode – This mode is demo only. In many cases, when
you draw a sketch in demo mode, the final sketch is labeled as “Demo
Only.” Only choose this option if you do not already have a fully
licensed sketcher you intend to use with WinTOTAL as it is only intended for
demonstration purposes.
- Depending on your authorization choice, several things may occur…
- If you register in Demo Mode, you’re immediately able
to draw demo sketches through WinTOTAL.
- If you register Manually, you’re prompted to enter the
authorization code you received from your sketch vendor. Once you
enter your authorization code, your sketcher is fully activated for use in
WinTOTAL for 14 days. After 14 days, you must register online to
complete the authorization process.
- If you register Online, WinTOTAL connects to the
Internet and authorizes your license. Depending on the types of
license you have purchased from your sketch vendor, several things may
occur.
- If an available single user license is found, you’re prompted to use it
to authorize your sketching software. Click Yes to
use your available license.
- If WinTOTAL finds both an available single user license and a Network
license of your sketcher, you’re prompted to choose your license. Click
either Network or Individual to indicate
your choice. Then, click OK in the confirmation screen that
appears.
- If WinTOTAL is unable to find a license available, you’re prompted to
visit the VIP Marketplace to purchase a license or to run the sketcher in
demo mode. Click Demo Mode or
Marketplace to indicate your choice or click
Cancel to address the issue at a later time.
- Click Save when finished to save your changes.
If you need to dissolve this integration at any later point in time, repeat
steps 1-3 and then click the UnRegister link.